The use of a lift mast allows silage cutting from more than 3 m height. Even higher when a hydraulic top link is used.
| Type |
block capacity m3 |
max. opening
in cm. |
working width
in cm |
no. of cylinders |
| 157 HA |
1.10 |
85 |
157 |
2 |
| 177 HA |
1.25 |
85 |
177 |
2 |
| Type |
block capacity m3 |
max. opening
in cm. |
working width
in cm |
no. of cylinders |
| 140 HA |
1.75 |
130 |
140 |
2 |
| 160 HA |
2.00 |
130 |
160 |
2 |
| 180 HA |
2.25 |
130 |
180 |
2 |
| 200 HA |
2.50 |
130 |
200 |
2 |
| Type |
block capacity m3 |
max. opening
in cm |
working width
in cm |
no. of cylinders |
|
Telegator 180 HA
|
1.50 |
100 |
180 |
2 |
|
Telegator 200 HA
|
1.75 |
100 |
200 |
2 |
The Alligator series with lift mast comes standard with a manually operated valve block and an hydraulic push-off mechanism. Also standard is a rapid-action coupling bar for easy coupling the grab to the tractor.
As an extra, all Alligators have a lift mast with a second coupling option, allowing the grab to be closer attached to the tractor. As a result the weight is slightly better distributed in relation to the tractor.
The Alligator types 157 through to 140 and the Telegator 180 and 200 have been fitted with one lift mast cylinder. The Alligator type 160 and higher have all been fitted with two lift mast cylinders.
The lift mast of the Alligator 157 and 177 is 240 cm long, the lift mast of the Alligator 140, 160, 180, 200 and the Telegator series is 200 cm long. The shorter 200 cm lift mast is optional for the Alligator 157 and 177.
A remote control using so-called bowden cables or electrical control for the lift mast machines is optional.
